Residential Preventative Maintenance Protection Plans - Around Town Plumbing and Heating

Preventative Maintenance Plans

The Top-to-Bottom Inspection alone is worth the price of the plan! Get a top-to-bottom system checkup and peace of mind all year round. With a Maintenance Plan, any work you need will be discounted and given top priority scheduling.

Click below to see details of our thorough inspections!

Top-to-Bottom Plumbing Inspection
  • Inspect faucets for leaks
  • Check garbage disposal operation
  • Check water pressure in home
  • Inspect accessible, exposed drain lines for signs of leaks
  • Inspect accessible water lines for signs of leaks
  • Check sump pump operation
  • Check dishwasher drain and water connection
  • Check for slow drains in bathtubs and sinks
  • Check outside hose spigot
  • Test water heater operation
  • Flush 1 gallon water from water heater if valve works (small fee for repair)
  • Check operation of water heater gas valve/burner
  • Check flue pipe for deterioration on gas heater/check for carbon dioxide leaks
Top-to-Bottom Boiler Inspection

Check for water leaks
Inspect and clean burners
Inspect and clean pilot assembly
Cycle burners and check color of flame
Check and test temperature and pressure gauges
Verify manual reset limit operation
Inspect all piping and flue condition
Verify operation of all zones and circulator pumps
Oil circulator pumps and document amps
Check all supports and hangers
Verify gas pressures and document
Check circulator pump couplers
Tighten all electrical connections
Oil tank

Top-to-Bottom Furnace Inspection
  • Check integrity of heat exchanger
  • Check and inspect venting (flue) carbon dioxide detector
  • Check and clean burners
  • Check and record gas inlet pressures
  • Check and replace air filter
  • Check and clean pilot assembly
  • Check and record indoor motor amps
  • Check, clean and cycle condensate pump
  • Verify operation of all safeties
  • Inspect and tighten motor mounts
  • Check condition of main duct trunk
  • Check and tighten all electrical connections
  • Change oil filters and nozzles (if applicable)
  • Adjust electrodes (if applicable)
Top-to-Bottom AC Inspection
  • Check and replace air filters
  • Check and record indoor motor amps
  • Tighten indoor motor mounts
  • Check and clean evaporator coil
  • Check and clean outdoor condenser coil
  • Check and record compressor amps
  • Tighten all electrical connections
  • Check all contactors for pitting
  • Check, cycle and clean condensate pump
  • Check weather- and liquid-tight
  • Check suction line insulation
  • Check and record condensor amps